The company manufactures high-quality tube couplings, adaptors, pipe flanges, diagnostic couplings, and allied control valves under the brand name Hyloc for more than 47 years.
The Battle of Power Systems:
Hydraulics or Pneumatics for Modern Industries
Any of modern construction or manufacturing applications are using one or all of three different kinds of power: electrical, hydraulic or pneumatic. Pneumatics provides power by means of pressurized air or gases, whereas, Hydraulics provides fluid power by means of pressurized liquids, such as oil or water. In choosing one of the two, some of the factors to be considered are cost-effectiveness, materials to be moved, availability of resources and space etc.
Each type of power has its advantages and disadvantages, according to circumstances.
Strength:
Hydraulics is the best option for strength, because the liquid medium used for its operation has a high mass density and is highly incompressible. This means that hydraulics can develop much higher levels of pressure, and can use that pressure to transmit the power that will drive your application. Industrial applications using hydraulic power may command anything from 1,000-5,000 pounds per square inch (psi) of pressure, while some specialized applications such as mining equipment or heavy lifting cranes can develop 10,000 psi or more.
When implementing hydraulics, one crucial aspect to consider is the utilization of hydraulic tube fittings. These fittings play a vital role in ensuring a secure and reliable connection between hydraulic components. By incorporating hydraulic tube fittings, you can effectively channel the immense power generated by the hydraulic system, ensuring seamless transmission throughout your application. These fittings are specifically designed to withstand the demanding conditions and high pressures associated with hydraulic systems, providing an essential link that enables efficient and dependable operation.
The media used in pneumatics have low mass density and are easily compressible. In some circumstances, gas or air can be compressed up to several hundred psi, but most mechanical applications are based on an operational pressure of only 80-100 psi. This means that pneumatic systems are largely incapable of the much larger force as offered by hydraulics, and are unsuited to the moving or lifting of heavy loads. Compressed air is also subjected to unexpected pressure drops or fluctuations which can cause operations to become jerky or unstable.
Hygiene:
Pneumatic systems win out over hydraulics in the field of hygiene, as the only thing that can leak out of your system is air. Within the system itself, the compressed air will be cleaned of oil, water or metal particles, and any other contaminants, by the filtration unit. Pneumatic systems are generally favored by environmentally-conscious companies.
You’ll also be likely to choose pneumatics if you’re installing systems in a clean room, a pharmaceutical laboratory, or the food and beverage industry. In these environments there must be absolutely no risk of contamination, so hydraulic systems are generally off-limits as they may be susceptible to leakage.
Whether you choose water or oil in a hydraulic system, either of these may potentially leak out via faulty hydraulic seals, hydraulic valves or worn hoses. This will contaminate your clean environment despite any safeguards you may put in place. The presence of liquids may also invite corrosion of the hardware, with a further risk of introducing contaminants. Storage tanks are also required for the fluids, and residues must be disposed of at the end of the operational process.
Speed:
Speed is one of the pneumatic system’s biggest advantages. Compressed air has a high flow rate, which enables the quick release of energy and high-speed motion of moving parts such as actuators. Pneumatic actuators can achieve high cycle speeds and increased duty cycling, which deliver greater productivity. The advantage of rapid cylinder movement is further enhanced by the availability of equipment in very small sizes, ideal for use in applications where miniaturization is a priority.
Air has a much lower mass density and can flow much more quickly and easily through pipework. Another advantage of the pneumatic system is that valves and cylinders can quickly alter their state or change direction by dumping their compressed air. This can be voided straight to the atmosphere and requires no further disposal.
Water and hydraulic oil have a much greater resistance than air, with the viscosity of oil making it much slower. Although it will ultimately develop a greater degree of force and maintain constant pressure, it does not have the same rapidity as air movement and may take longer to get your system running. In the event of a leakage or emergency, hydraulic fluid may not be vented rapidly to the environment, but must be re-routed back to its tank or reservoir.
Energy:
Comparing hydraulics to pneumatics with regard to energy consumption, there are several factors to be considered. Both systems usually require an input of electrical power to drive them, and a pneumatic system needs the continuous running of a compressor to provide the compressed air. The air supply cannot be recycled and requires constant replenishment, so energy consumption in this respect may be high. Any air leakage will also a waste energy in the system.
You also have to take into account the fact that pneumatic systems lose energy through heat produced by the compression process – though there are several measures that can be taken to make your system more energy-efficient. Fortunately, air is still free of charge, so there is no need to pay for energy in obtaining, replenishing or disposing of waste products.
Hydraulic fluids can use the same oil or water over and over again after the initial start-up. Provided you have a good filtration system and keep it properly maintained, a hydraulic system can be very energy-efficient in the long run. However, electrical power is still generally required to drive the pump, and much of the energy consumed by the pump is wasted. This is because the fluid medium is in constant circulation to maintain system pressure, even though only short periods of actuation may be required to drive the application. The more viscous the fluid medium, the more energy will also be required to move it. However, significant improvements are being achieved, with technological advancements involving different types of pump and the potential of modulating drives.
Safety:
Considering hydraulics and pneumatics in the industrial environment, pneumatics is undoubtedly the safer option. A leakage of compressed air is not going to cause contamination, since air is not poisonous or corrosive, although other gases used in stand- alone or portable equipment may be hazardous. Compressed air does not generally pose a risk of fire and it won’t explode, but the forcible escape of air through mechanical failure may cause physical injury.
Hydraulic fluids, on the other hand, are always at risk of potentially dangerous leaks. Even water can cause damage if it’s hot enough to scald. Other fluid media such as oil, ethylene glycol, plasma and fluid synthetics may be corrosive and/or poisonous. The fluid media may be combustible and require extra safety precautions, and used oil or fluids must eventually be drained and safely disposed of. In general, hydraulic systems incorporate fewer mechanical parts, but these may be subject to corrosion and potential component failures.
Complexity:
Hydraulic systems typically have fewer moving parts and may be easily controlled with push buttons and simple levers. On the other hand, hydraulics rely on complex engineering that requires a system of valves and hoses, as well as a pump powered by an external energy source and a tank for storage of the liquid medium. It is possible to install a centralized power unit in a manufacturing plant in order to control several different hydraulic applications. Newer technology is introducing much better systems of managing speed, pressure and power.
Pneumatic system designs are also typically very simple, and operate at a much lower pressure, so their component parts may be made from cheaper and less complex materials. Since the fluid medium is not corrosive or combustible, precautions do not need to be built in against these safety hazards. Technological advances have increased the variety of uses for pneumatic systems, with miniaturization and new materials helping to reduce weight as well as bulk.
Maintenance:
Pneumatic systems are cleaner and easier to maintain than hydraulic ones, since the fluid medium is air. A regular schedule of inspection and preventive maintenance is usually all that’s required to keep a pneumatic system running, e.g. checking the seals and making sure there is no leakage of air. The air does need to be cleaned of contaminants, and one of the most important maintenance procedures is the cleaning and regular replacement of the filter-regulator-lubricator unit.
With hydraulic systems, the main issue is corrosion. Unless you’re able to install pipes made of non-corrosive material, such as Electro plated, regular monitoring will be required to assess how the pipes are being affected by the fluid medium. Water may cause oxidation, and oils or other media may leave deposits that will cause corrosion. Regular checks and replacements will be required for critical components such as seals, hoses and valves.